Contact Us
LKV592-V2.0

4K@60Hz HDMI™ Over IP Extender

This is an HDMI™ over IP extender kit. With this device, UHD HDMI™ signals can be transmitted at high definition and ultra low latency over 120 meters of Cat6/6A/7 cable at 4K@60Hz 4:4:4 HDR resolution. It supports point-to-point connection or one-to-many connection through gigabit switch, and cascading of switches is also supported. This HDMI™ extender kit has features including HDMI™ loop out, bi-directional IR passthrough, ARC, RS-232 passthrough, and audio extraction through S/PDIF output on the receiver. This extender kit is a reliable UHD video transmission and distribution solution which can be widely used in security monitoring, rail transit, broadcasting, smart cities, conference and other fields.
Introduction
Parameters
Downloads

LKV592-V2.0宣传信.jpg

HDMI length
≤ 5m
Maximum transfer rate
18Gbps
Compatibility
HDMI 2.0 (Deep color, 4K, HDR10, YUV444)
HDCP 1.4/HDCP 2.2
Resolutions
4096x2160@24/25/30/50/60Hz, 3840x2160@24/25/30/50/60Hz, 1080p@24/25/50/60Hz, 720p@50/60Hz, 1024x768, 1280x768, 1280x800, 1280x960, 1280x1024, 1440x900, 1400x1050, 1600x900, 1680x1050, 1920x1080, 1920x1200
Connection types
One-to-one connection
One-to-many connection
Switch cascading
Transmission distance
CAT5/5e ≤ 80m ,CAT6/6A/7 ≤ 120m
HDMI Out
LPCM2.1CH//DTS-Audio/ Dolby Atmos DD+
S/PDIF Out(ARC)
LPCM 2.1CH/DTS-Audio/Dolby Digital 5.1CH
Audio sampling rate
44.1kHz, 48kHz, 88kHz, 96kHz, 176kHz, 192kHz
Audio bit depth
16bit, 24bit
ARC
Supported
Receiving range
≤ 5m
Infrared frequency
20kHz~60kHz
CEC
supported
RS-232 (GND/RxD/TxD)
Default baud rate: 115200 Supported: 2400, 4800, 9600, 19200, 38400, 57600, 115200, 230400
Power Supply
DC 5V/2A
Power Consumption
TX/RX:7.5W
Working temperature
-20℃~50℃
Storage temperature
-30℃~70℃
Humidity
0~90% RH (no condensation)
Housing
lron
Weight
TX:369.0g,RX:368.0g
Color
Black
Dimensions
124.6 (L) x115.0 (W) x21.3 (H) mm
Protection
ESD protection
1a Contact discharge level 2 (±4KV)
1b Air discharge level 3 (±8KV)
Implementation of the standard: IEC61000-4-2
Lightning protection, Surge protection
Product Manual

Product specification

Update Firmware