iMMS-IM02

4K@60Hz HDMI™ over IP Matrix

This 4K@60Hz HDMI™ over IP matrix kit, including a transmitter and a receiver, realizing switching, extending and distributing 4K@60Hz audio and video signals via the IGMP switch. Built on ipcolor STREAM™ technology to deliver high-definition and low-latency transmission. The transmitter can extend 256 signal sources and switch to 256 receiving terminals. The HDMI™ signal can be extended up to 120 meters over Category 6 or higher-level networking cables while supporting one-toone connection and many-to-many connection. Equipped with HDMI™ loop out, bi-directional IR passback, RS-232 command control, I/O, POE, etc. Widely used in audiovisual conference, transportation control center, radio and television, education and training and other fields.

Introduction

Parameters

Downloads

HDMI length

≤ 5m

Maximum transfer rate

18Gbps

Compatibility

HDMI 2.0，HDCP 1.4/HDCP 2.2

Resolutions

4096x2160@24/30Hz, 3840x2160@24/30/50/60Hz, 1080p@50/60Hz,720p@50/60Hz, 1920x1200@60Hz, 2560x1440@60Hz

Connection types

One-to-one connection
Many-to-many connection
Switch cascading

Transmission distance

CAT5 80m / CAT5E 100m / CAT6 120m

Transmission latency

4K@60Hz: 130~200ms
1080P@60Hz: 70~130ms

HDMI output

LPCM 2.0

IR receiving range

≤ 5m

IR frequency

20kHz~60kHz

RS-232 (GND/RXD/TXD)

Default baud rate: 115200
Supported: 2400, 4800, 9600, 19200, 38400, 57600, 115200

Power Supply

TX/RX：DC 5V/2A(alternative)

Power Consumption

TX ≤ 5.5W
RX ≤ 3.5W

Working temperature

- 20℃~60℃

Storage temperature

- 30℃~70℃

Humidity

0~90%RH (no condensation）

Housing

Iron

Weight

TX：523g，RX：514g

Color

Black

Dimensions

191.0(L)*96.0(W)*25.0(H)mm

Protection

ESD protection
1a Contact discharge level 2 (±4KV)
1b Air discharge level 3 (±8KV)
Implementation of the standard: IEC61000-4-2
Lightning protection, Surge protection

Product Manual

Product specification

Update Firmware